Crane rental in Weatherford, OK
Weatherford is the largest city in Custer County, with a mix of oil and gas, wind energy, manufacturing and university construction. Send your lift details and we'll match you with a local operator.
Wind turbines, oilfield and a university town
Weatherford is home to the Weatherford Wind Energy Center, with 98 GE 1.5 MW turbines, and the city displays a turbine blade in Heritage Park. Wind sites like this one need crane support for major component work and maintenance.
The city is also a base for oil and natural gas companies working the Anadarko Basin, and Custer County has been among Oklahoma's busiest counties for drilling rigs in 2026 according to weekly Baker Hughes county counts. Expect crane requests for tank batteries, compressors, separators and pipe.
Away from the oilfield, Weatherford has Southwestern Oklahoma State University (SWOSU), a Kodak manufacturing plant that was expanded in 2017, and a growing population (12,076 in the 2020 census, up about 11.5% from 2010). That growth means commercial construction, campus and school projects, rooftop HVAC work and steel buildings.
Access
Weatherford is on Interstate 40 with Route 66 following Main Street, and State Highway 54 runs north and south. It is the closest of our towns to Oklahoma City (about 68 road miles), and the Thomas P. Stafford Airport has a 5,100-foot runway.
Common crane jobs around Weatherford
- Wind turbine service support and component lifts
- Compressor, separator and tank sets for oil and gas operators
- Commercial and campus construction: steel, precast and roof units
- Manufacturing and plant equipment setting
- Steel buildings and ag structures in southeastern Custer County
- Residential lifts: trees, hot tubs and pool equipment
Getting a crane to your site
Approximate road distances from Weatherford. Mobilization time and travel charges depend on where the operator's crane is parked, so put your exact location in the form.
| To | Approx. road miles | Main route |
|---|---|---|
| Clinton | 18 | I-40 west |
| Cordell | 32 | I-40 / US 183 |
| Elk City | 51 | I-40 west |
| Oklahoma City | 68 | I-40 east |
| Cheyenne | 75 | I-40 / SH 6 / US 283 |
Distances are approximate driving distances from OpenStreetMap routing data, rounded.
How it works
- Send the job details. Use the quote form: what you're lifting, how heavy, how high or far, where, and when. No phone call required.
- We match you with a local operator. Your request goes to a vetted crane operator who works the Western Oklahoma area and has equipment suited to the job.
- The operator quotes and confirms. They'll follow up by text or email to confirm the crane size, rigging, site access and price. You decide whether to book.
- The lift gets done. The crane company performs the work under its own insurance, operators and safety program.
Questions
What size crane do I need?
It depends on more than the weight. Crane capacity drops quickly as the load moves farther from the crane, so the operator sizes the crane using the load weight plus rigging, the radius (horizontal distance from the crane to where the load is picked and set), and the height needed. A crane rated at 30 tons can lift far less than 30 tons at a long reach.
As a rough guide: boom trucks and smaller hydraulic cranes are commonly used for lighter, close-in picks such as rooftop HVAC units, hot tubs, trusses and small tanks; larger hydraulic truck or all-terrain cranes are used for heavier tanks, separators, steel and long reaches; wind turbine components need large specialty cranes. The operator will confirm the right machine from their load charts.
What information should I have ready?
- Weight of the heaviest piece (nameplate, spec sheet or bill of lading is best) and its dimensions
- Where it is now and where it needs to go, and the closest spot a crane can set up
- Lift height, and how far from the crane the load must be set
- Ground and access: lease road, gravel pad, soft or muddy ground, gates, slopes
- Overhead power lines, buildings or other obstructions
- Date and time window, plus an on-site contact
- Whether you need rigging, a rigger/signal person, or a truck to haul the load
Photos of the load and the site help a lot. Mention them in the details box and the operator can ask for them when they follow up.
What's the difference between an operated and a bare rental?
An operated (operated & maintained) rental includes the crane plus the crane company's operator, and often a rigger or oiler, usually billed by the hour with a minimum. That's what most one-off jobs use. A bare rental is the machine only: you supply a qualified operator and take on more responsibility for the equipment and the lift. For construction work, OSHA's crane rule (29 CFR 1926 Subpart CC) requires operators to be trained and certified or qualified, so bare rentals are generally a fit only for companies with their own certified operators.
How much notice do you need?
As much as you can give. Availability depends on the operator's schedule and the size of crane needed. Smaller cranes can sometimes be scheduled on short notice; large cranes, multi-crane picks, and jobs that need a lift plan or permits take longer to line up. Put your real deadline in the form and the operator will tell you what's possible.
Local facts on this page: Wikipedia: Weatherford, Oklahoma · CrudeLogic Oklahoma rig count (Baker Hughes) · OSRM routing